Price includes shipping to your door in the continental US.  $965.00 for the cage kit V4, and $85.00 shipping special.  Shipping via UPS costs $135.00 due to oversize nature and weight of the box.  You save $50.00 with the current shipping special!

Features

• Lightweight weld in kit. Approximately 100lbs.
• Landing perches, 14 gussets and landing plates all included.
• Partially notched. 11 of the tubes are pre notched.
• Computer controlled bending ensuring accurate bends every time.
• Comes complete with 30  page installation guide with over 55 pictures.
• Every piece is marked with a part # that corresponds to the installation guide and 3 seperate full page schematics within the guide.
• Front down tubes are located behind the dash.
• Main Hoop gets installed to perches on the floor that connect the rocker panel, floor and rear tub of the car not to the upper package tray.
• Rear down tubes land next to shock mounts.
• When installed properly less than 1/4 inch of clearance to roof allowing for more head room for taller drivers.
• Includes Nascar door bars on both drivers and passenger sides installed at an angle that provide the driver with added safety in the event of a side impact.
• Allows for stock passenger seat to be reinstalled once complete.
• Includes concealed dash bar that is very high up in the car.  Beware of low bars that can hurt you in the event of a roll over accident.
• After complete installation dash is still removable in one piece.
• Includes tubes and plates that connect front down tubes to the firewall.
• Additional tubes available ($30.00) to X brace rear down tubes.
• Nascar Bars available ($0.00 - Now included in kit) for Passenger side.  SCCA ruled this is now legal effective 10/1/05.  The additional weight of the Nascar Bars (as compared to straight bars) is roughly 3lbs and you can gut roughly 25lbs out of the door making this option a good weight reducer.
• Kill Switch Plate for passenger side main hoop area.
• Only round front perch in the industry. Laser cut to fit the rocker panel perfectly.  You do not need to make any modifications to this perch during the install process at all.  This cuts our roughly a half hour per side during installation.