The MiataCage fuel test port kit comes complete with the male and female quick disconnect NHRA approved Aeroquip fuel specific pieces, brass barbed T coupler, 5 feet of rubber hose and 2 hose clamps. Easy to install and provides a safe leakproof solution for your SCCA fuel test port requirements. We have our own custom made T fitting to minimize the amount of connectors and adaptors which are ultimately more weight and are potential failure points.
Aeroquip couplers are self sealing dual check valves on both the male and female couplers allowing repeated connection and disconnection with minimal fluid loss.
This is NOT the cheap air conditioning style schraeder valves others offer. Why risk fire and low volume flow with cheap sub standard equipment? Shraeder valves are NOT for fuel!
1999-2005 Model also available. For the 99-05 cars you must replace the stock plastic fuel line with a rubber line which we include in the kit. Choose your model year from the drop down list below.
We pump the fuel out of the car after every session on track to stay on top of how much fuel we use to keep the overall weight at the end of the race as close to the minimum as possible. If we come in more than 3 lbs over weight my engineer is not happy. This fuel sample test port kit flows at a high rate making the time required to drain the tank minimal. Fuel weighs roughly 6lbs per gallon, so we want to finish the race with as little fuel/weight in the car as possible. Its high weight and it moves around, so making sure we only run the amount of fuel needed for the session impacts the weight of the vehicle.
